Oxygen Sensor: Basic Function, Failure Symptoms and Replacement Cost

Hello everyone, thank you for landing in this site. In this article we are going to explain about one of the sensor in the engine systems called “oxygen sensor”.  So you will know the basic function, working principle, bad symptoms and average replacement cost of this part. Here we go:

Basic Function and Working Principle

The internal combustion engine of your vehicle will always produce exhaust gases after the air and fuel mixture has ignited in its cylinders. These gases contain a lot of different elements in them, such as carbon and oxygen. In the exhaust manifold, there is a component called an oxygen sensor which keeps track of the oxygen level in these exhaust gases as they leave the engine. This is oxygen that did not burn during the original air and fuel combustion.

After the oxygen sensor detects the oxygen level, it sends this information back to the engine control module. This, of course, is the central computer that manages all the systems in the vehicle and communicates with a variety of different sensors that are within them. When the engine control module receives information about the oxygen level in the exhaust gases, it will know if the engine is burning too much fuel or too little fuel.

For instance, if there is more air than fuel in the chamber cylinders, this will cause a lean combustion to take place. The exhaust gases that emit from such a combustion will have more oxygen in them. Once the oxygen sensor detects this and transmits the data to the engine control module, then the computer will make the proper adjustments to the timing of the fuel injectors and the operation of the engine. That way, the air and fuel mixture in the engine will be at its best for combustion purposes.

Top 5 Bad Symptoms

The oxygen sensor is a vital component of the engine. If anything were to cause the oxygen sensor to malfunction, it could interfere with the entire internal combustion process. Then you could experience all sorts of problems with your engine while driving. Fortunately, these symptoms are easy enough to recognize so that you will know trouble exists somewhere in your engine or with its corresponding components.

Below are the top 5 symptoms of a bad or worn out oxygen sensor. Although it is not common for this sensor to go bad, it could happen if you keep your car for a long time.

1) Check Engine Light – Like mentioned, the oxygen sensor has a powerful influence over the air and fuel combustion process. If the sensor detects there to be less oxygen in the exhaust gases after combustion, the engine control module will try to correct this. But if the oxygen sensor is not working properly, the engine control module won’t know to correct this problem. As a result, the engine’s performance will be diminished. The module will then detect that some kind of engine problem is present. This causes the Check Engine warning light to illuminate on the dashboard.

2) Bad Fuel Economy – If there is a rich air and fuel mixture in any of the combustion cylinders, this means that more fuel is present than air.  This will not be detected by the oxygen sensor if it has gone bad. Then you’ll have a situation where more fuel is being burned in the engine than needed. The result is a bad fuel economy and more money spent on gas.

3) Rough Idling – A rough idling engine means your engine does not run steady when the car is parked or stopped. The normal RPM rate for an idle engine is around 1,000. But if your engine RPM shoots up to 2,000 or 3,000, for instance, then you have a rough idling problem. This can be a symptom of many kinds of car problems, including a bad oxygen sensor. The engine timing will be more difficult for the engine control module to manage. Then you’ll have combustion intervals which cause misfires.

4) Weak Engine Performance – Anytime there is interference in the normal combustion process of the engine, you are going to experience a weakened engine performance. This is what will happen when you have a bad oxygen sensor. You will know this is happening while you’re driving. As you step on the gas pedal, the acceleration will be limited or nonexistent.

5) Failed Emissions Test – Since the oxygen sensor is located in the manifold of the exhaust system, it is able to assist with emissions control. If you live in a state which requires emissions tests every 6 months or so, you might discover that you have a bad oxygen sensor if you end up failing the emissions test. It might not necessarily be linked to the oxygen sensor, but you will find out as soon as a mechanic checks to see why your vehicle failed the test.

Replacement Cost

Do not wait to replace your oxygen sensor. As soon as you verify that your oxygen sensor is to blame for these symptoms, then it is time to replace this sensor immediately. Otherwise, you could be putting your engine at risk of getting severely damaged. Then you will be looking at thousands of dollars in repair costs. It is so simple and affordable to replace an oxygen sensor. You really have no excuse not to do it.

Read also: What Happens when a Timing Chain Breaks while Driving

The average replacement cost of an oxygen sensor is $250 to $400, depending on the make and model of your vehicle. The parts cost is about $130 to $250 and the labor costs are about $120 to $150. For the average economy car, you should only have to pay at the lower end of the total estimated price range ($250). This is not a huge investment when it comes to protecting your engine and sustaining its functionality.

Post Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.